driver-training

Driver Training: Backing and Docking

The unit begins with a brief online lesson to familiarize you with the procedures for backing maneuvers and to explain the precautions required for backing safely. The rest of the unit is spent in training with tractor-trailers on the driving range.

What Your Driver Will Learn?

Backing Principles and Rules

Four Basic Backing Maneuvers

Student Driver Training Toolbox

This course is included in the Student Driver Training Toolbox. What is the Student Driver Training Toolbox? A box of tools to run your training program your way, with maximum efficiency. You can now track every aspect of student training electronically. Who can benefit from this system? Truck driving schools, delivery companies, bus lines, carriers, municipalities...any company that trains drivers.

The course below is from the catalog. View the other courses in the online library.

Trucking Companies should use the service that we built for them:

Safety as a Service, online driver training and recruiting. Same courses-different tools.

Backing: Theory

This unit will introduce driver-trainees to the combination vehicle driver training curriculum and the components of a combination vehicle.

Tip: These Videos Are Not Supported In Internet Explorer. Try Any Other Internet Browser; Chrome, Firefox, iphone, Android, Commodore, Anything Other Than Ie.

Principles of Backing Tractor-Trailers

There are two important terms you need to know while backing which relate to your steering activity with the tractor. They are "jacking" and "chasing."

Jacking (i.e., jackknifing)

Jacking is employed to change the direction that the trailer wheels are following; that is, you make the trailer jack to the right or to the left depending upon the path you want the trailer to take. The trailer will "jack" in the direction that you turn the steering wheel. If you want the trailer to jack to the right, then turn the wheel to the right.

Chasing (i.e., following the trailer)

Once the tractor has "jacked" the trailer into the path (direction) desired, you then must chase the trailer through its path for as long as you desire the trailer to follow that path. You do that the same way you kept the trailer in a straight path. If the trailer begins to drift off of the curved path, you turn the wheel away from the drift. For example, if the trailer drifts to the left, you turn the wheel to the right. Jacking and chasing are two terms you will be hearing over and over again from your instructor while he or she is teaching you the principles of backing. When the instructor says, "O.K., now give it some jack," he or she is telling you to change the direction of the trailer's path. You do this with the tractor its true, but you are actually steering the trailer. This is why the rear tractor axle is referred to as the "steering" axle when you're in reverse. When the instructor says, "O.K., now chase it," he or she is telling you that you have now "steered" the trailer into the desired path. Then you must "chase" the trailer along that path. Failure to do so immediately will result in the trailer continuing to jack past the intended path. If you fail to chase it, eventually your rig will end in a full jackknife with the trailer against the side of the cab.

When

All jacking and chasing is a matter of when (timing) and how much steering input). If you jack too soon or too late the trailer doesn't steer into the path you want it too. Similarly, if you're too late or too soon in chasing, the trailer will not continue along the desired path. How much--Too much or too little a turn on the steering wheel will start the trailer in the wrong direction. Steering too much or too little, chasing the trailer will cause it to go off course.

Backing the Tractor-Trailer in Straight Line Checklist

1. Put vehicle in position by moving forward until tractor-trailer is aligned and front wheels are straight.

2. Put vehicle in reverse.

3. Constantly check behind when backing.

4. Steering

5.Pull up and start again if too far out of position.

Download the Straight Line Backing Checklist (Opens New Window)

Safe Backing Checklist

1. Avoid Backing When Possible

2. Check Clearances Before Starting

Check behind vehicle for obstructions:

3. Use Helper When Possible

4. Use Horn and Flashers

5. Keep window open and radio off In order to hear any warning noises

6. Start in Proper Position

7. Back Slowly

8. Constantly Check Behind When Backing

9. Start Over When Necessary

Close this window after the videos complete to receive credit for these lessons.

View the other courses in the online library or contact CDL College to start using the Student Driver Training Toolbox in your organization. 303-367-1030.

driver-training

© CDL College LLC 2016